ONE LAST THING: Cleaning the Porta Boat

I finally broke down and splurged on renting a spot on the dingy dock for my eight foot Porta Boat. I spend most of my time during the summer living on the boat with an occasional respite on land for work or to accompany my gal on a beach vacation. Since I have been using a folding Porta Boat for fourteen years I was able to fold it up when and take it home as needed. As I'm getting older this is becoming more of a pain and so I opened the wallet to have access to the dingy dock at the boatyard. It certainly makes it more convenient for quick trips home or provisions. Since for over a decade I have avoided the dingy dock fees that could have paid for the Porta Boat three or four times over I thought it was about time to make things a little easier for me. Though leaving the Porta Boat in the water for the entire season bought some new issues.

WHAT WORKS: Plastic bag on the prop.

That's The Bag I'm In -Fred Neil

Once again I was away from the BIANKA for an extended period of time. One month or so. I wanted to avoid the marine growth on the prop the boat experienced earlier this summer as you can see below:

So this time I decided to do an experiment of something I had heard about from other sailors. Before I left the boat I covered the prop with a plastic bag. One of those that you get when you buy something in supermarkets etc... I tied it around the prop and came back a month later and it looked like this:

I dove under the boat just using my snorkel and quickly removed the bag from the prop:



I must say it worked pretty good  in keeping the prop clean of the major marine growth and only had a barnacle or two on the blades:

So if you are going to away for an extended time covering the prop with a plastic bag does work pretty good in keeping marine growth off the prop.

PROP TALK

As I mentioned I was away from the boat for over a month thanks to some freelance work that came my way. It will certainly help pay some of the boat expenses. Unfortunately, it was in the wicked city of Washington DC two hundred and fifty miles away from the boat and so I was not able check on the boat. I was expecting the worse and hoping for the best when I finally returned. I was hoping that I would not greeted by a sail cover full of bird poo like I was last fall after being away for three weeks. I had deliberately kept the lines securing the boom a little loose hoping that it's movement would discourage the birds from landing there for long. This plan seemed to work or maybe I was just lucky.

The other area of the boat I expected to have to clean was the prop. Unfortunately, this had met my expectations for a mess. I don't paint my prop with any anti fouling coating as I try to keep metallic interactions to a minimum. I also don't mind diving down below to clean the prop with a paint scrapper on occasion. As you can see in this video below the sponges and barnacles can grow pretty rapidly on a prop that has not turned in over a month. Even a small blackfish seems to like hanging out there. Interesting that the two zinc are relatively clean:



After seeing the job that awaited me I decided to see if I could minimize the cleaning and scrapping I would need to do by using the torque of my electric propulsion system to knock off what marine growth I could. Turning the prop with an EP system for this function is a lot easier than with a diesel engine. One of the nice benefits of electric propulsion is there is no need to warm an EP system up. You just turn the key and run the  throttle back and forth for under a minute. It's not really healthy to turn fire up a diesel and  turn it on and off for such a short time. Electric Propulsion does not care if you just need it for a short burst of power to clear the prop. The video below shows how  my little forward and reverse propulsion routine cleaned away a lot of the marine growth:



I still had to dive down and clean some of the barnacles of with my handy dandy five in one paint scrapper tool. The video below shows what it looked like after a quick cleaning:



Much better but, I found the blade on my scraper blade was a little wobbly due to rust finally having it's way. So it looks like it's time to replace it with a new one.

Perhaps one made from stainless steel next time. So it won't rust out and I can scrap the prop blades with a little more force next time.

GOOD NEWS FOR BOAT BOTTOMS

It's getting a little cold these days to go and check the bottom of the boat. Some areas of the country like Washington State going after recreational boaters and preventing them from using copper based anti fouling paint. Why? Because they can. Meanwhile, they don't say boo to the commercial vessels in their waters. But there is some good news:

"Multi-seasonal barnacle (Balanus improvisus) protection achieved by trace amounts of a macrocyclic lactone (ivermectin) included in rosin-based coatings"

A research paper of the stuff can be found here. Even better news is that Ivermectin is already very available for boaters and anyone else that may want to make their own antifouling paint. More states may follow with the copper ban. But, if they come for my Gam Pro 6 in 1 Paint Scraper they will have to pry it out of my (hopefully not dead) hands.