Showing posts with label changing oil. Show all posts
Showing posts with label changing oil. Show all posts
Tuesday, June 30, 2015
MESSING ABOUT IN BOATS: Honda 2000i Oil Change Help
One of the maintenance rituals I do before launching is to change the oil in the Honda 2000 EU generator. I've been able to significantly reduce the the mess of this procedure by using a Hopkins Measure Funnel:
While this eliminates a lot of the mess of the oil changing procedure I still...
Saturday, August 23, 2014
TOOLS OF AN ELECTRIC SAILOR: Hopkins Measuring Funnel
One of the real nice things about Electric Propulsion and having removed the diesel engine from the boat is not needing to do multi quart oil changes every fifty hours. Indeed my maintenance has just about gone to zero in the seven years since I switched to electric propulsion. The only regular maintenance I have had to do has involved the Honda 2000 generator that serves for providing power for battery charging at anchor and also acts as a poor man's hybrid when doing an extended electro sail. The maintenance on the generator has been minimal consisting mainly of an annual oil change. The oil change on the Honda 2000 does not 
involve a lot of oil compared to the old Westebeke 27 diesel. In fact it's only .42 Quarts. Which is kind of a problem when one is using a plain funnel with a quart container of 30W oil that the Honda requires. It usually results in an overflow situation and some messy clean up.
I came across a very handy solution for oil change overflow problem in the form of the Hopkins FloTool 10704 Spill Saver Measu-Funnel. It is an elegant solution
for dealing with oil changes on small capacity engines like the Honda 2000eu generator or an outboard.
It has a graticule on the side calibrated in various liquid measurements. You just fill the container with the appropriate amount of oil you need. It also has a snap on cover that will help avoid any spills should you drop the funnel accidently.
It even has a cap at the end of the hose to capture any residual oil that may drip down from the container. You can then return the residual oil back into the original quart container and not waste a drop. In short this ingenious funnel makes oil changing on board or on land a much cleaner operation. That's why it's one of the tools of this electric sailor.
I came across a very handy solution for oil change overflow problem in the form of the Hopkins FloTool 10704 Spill Saver Measu-Funnel. It is an elegant solution
It has a graticule on the side calibrated in various liquid measurements. You just fill the container with the appropriate amount of oil you need. It also has a snap on cover that will help avoid any spills should you drop the funnel accidently.
It's operation is pretty simple. Once the funnel is filled with the premeasured amount of oil. You insert the clear hose of the funnel into the oil fill opening:
Then you turn the blue valve at the bottom of the funnel to start the flow of oil from the container to engine. Since the oil has been pre measured there is little chance of an overflow.
It even has a cap at the end of the hose to capture any residual oil that may drip down from the container. You can then return the residual oil back into the original quart container and not waste a drop. In short this ingenious funnel makes oil changing on board or on land a much cleaner operation. That's why it's one of the tools of this electric sailor.
Labels:
changing oil,
funnel,
GENERATORS,
HONDA 2000i GENERATOR,
oil,
oil change,
tools
Monday, March 24, 2008
REMOVING DIESEL FROM THE FUEL TANK
Since I will be putting in a new propulsion system and will no longer need to use diesel fuel. I needed to remove the remaining fuel in the on board tank. But, how to remove the fuel? I looked around the boat and found my Topsider Oil Changer. I usually used it to change the oil in the engine. It works by a vacuum principle. In order to make it work in removing the fuel I would need to use an adapter. The photo below shows the fuel tanks normal configuration.

This shows the fuel line connected to the fuel shut off valve. First I remove the fuel line and shutoff valve. I next screw in an adapter to which I attached the hose that goes to the Topsider container as shown in the photo below:
Another advantage of using the Topsider to empty the fuel tank is the clear hose allows you to check the condition the fuel as it is removed from the fuel tank. Once you have connected the Topsider hose it is just matter pumping the fuel into the Topsider container .
It holds about two gallons so you may need to transfer to another container a few times to empty the fuel tank. But, it is relatively easy and clean way to empty the tank. Unfortunately, my tank was 3/4 full so I had to pump out about twenty gallons. But, the good news is I gave it to a lobster man who was working on his boat. With diesel fuel prices at $3.50 a gallon he really appreciated it. Plus I did not have to lug the fuel it to a recycling center. I am also hoping that he might drop off a lobster or two this summer when I am on board. I call that a win win situation.
This shows the fuel line connected to the fuel shut off valve. First I remove the fuel line and shutoff valve. I next screw in an adapter to which I attached the hose that goes to the Topsider container as shown in the photo below:
It holds about two gallons so you may need to transfer to another container a few times to empty the fuel tank. But, it is relatively easy and clean way to empty the tank. Unfortunately, my tank was 3/4 full so I had to pump out about twenty gallons. But, the good news is I gave it to a lobster man who was working on his boat. With diesel fuel prices at $3.50 a gallon he really appreciated it. Plus I did not have to lug the fuel it to a recycling center. I am also hoping that he might drop off a lobster or two this summer when I am on board. I call that a win win situation.
Subscribe to:
Posts (Atom)