GIFTS FOR BOATERS FROM BIANKA'S GALLEY: Anchor Measuring Shot Glass

It's getting to be that time of year again when gift giving becomes a priority for many. It can be hard for sailors and landlubbers to find gifts for their boater friends. May I suggest this little stocking stuffer for the boaters on your list. Anchor Hocking Measuring Shot Glass. I personally use it quite a bit in the galley when cooking or when making a Bloody Bianka or Rum Spritzer for my sunset libation. It's suitably nautical in appearance for any boat. It can also be a nice thank you gift if you are invited aboard for an afternoon on the water not just during the Christmas holidays.

ANOTHER SOLAR PROJECT: Cockpit Ammeter Junction Box

Temporary cabin meter setup

With the purchase of the new Renogy 100 Watt Solar Panel. I finally got the gumption to get going on another long overdue project. namely moving the Solar Panel Ammeter from inside the cabin where it was temporarily mounted over ten years ago to a more useful cockpit location. Though like many projects my procrastination had the benefit of an improved idea over my original thoughts. For example I had purchased a Cable Connect Waterproof Enclosure Case Junction Box for another project. The measurements were metric and since I think through the dimensions I found the box was too big for my original plans.

 Original Kings LORAN mounted

But,  sipping a beer one day I looked at the space where the original Kings 8001 Loran unit used to reside and found that the waterproof junction box fit very nicely between the still installed Kings mounting bracket. AHA I thought the box would be perfect for the solar panel ammeter moving project. So it began.





 First I decided where on the waterproof box I would mount the ammeter and marked it out:

Then using a hole saw I cut out a hole for the back of the meter to fit through:

It was not quite the right size so out came the trusty Dremel Tool and using a cutting drill I was able to enlarge it slightly to the proper size. Once that was done I carefully removed the front panel of the meter to mark where the mounting holes would need to be drilled to secure the meter:

Once that was done I mounted the meter:

I used Anderson Powerpole connectors for most of the connections behind the panel in the junction box. This will allow for easy trouble shooting or changes in the future should I need to do so:

With the ammeter installed now I could easily see how many amps are heading into the 12 volt house bank and how I can improve on the amount of current by repositioning the movable Renogy 100 watt panel or repositioning the boom:

I also thought up another useful addition to this project that I will post about as soon as some parts arrive to implement it.