Friday, February 21, 2020

WINTER MAINTENANCE WITH WD-40


It's a nice windless sunny winter's day about 45 degrees Fahrenheit which makes it an
excellent day to head down to the Boatyard and check on BIANKA. No wind makes for
a pleasant day to do a boat check even if it is still winter.
But, even before I climb into the cockpit I needed to do some maintenance at ground level.Toward the end of last season the combination lock I used on the dinghy dock fell into the water for about a week. I rinsed it and initially sprayed WD-40 into it at that time and it continued to work. Over the winter the remaining salt inside had started to ooze out of the lock and was starting to corrode it and make it difficult turn to the right combination


So I reached for the WD-40 and sprayed the lock.


 With some help from an old toothbrush I managed to remove the salt cake residue from the lock. Soon it was almost as good as new and the lock mechanism worked smoothly..




Since I had the can of WD-40 out it was also time to  lubricant the folding joints of the ladder I
use to climb  aboard BIANKA over the winter.

A few sprays of WD-40 on a warm winters day may seem like simple maintenance but, makes for a big improvement in metal items exposed to  the environment over the winter.

1 comment:

Naomis Fenz said...

Nice post! I really like this post, thank you for sharing this with us.

Marine engine protection spray