OUTFITTING SEASON: VHF INSTALL

 Spring has come and the winter hiatus has released my gumption to the point where I am finally starting on projects that have long been planned. One of them is to install an additional VHF radio in the forward cabin. The radio was bought in 2018 so you can see I'm a little bit behind schedule. Every year I kept reminding myself I'll be able to do the installation during the summer but, never did.  Now is the time and the VHF install is first of the list this spring outfitting season.

First I had to place the flush mounted pattern that came with Standard Horizon GX2200 in the location where it would be mounted. I checked and double checked the space behind it to make sure there was nothing in the way. 

Once the pattern was outlined I drilled holes in the corners to allow for a jigsaw blade to be inserted.

Then using the jigsaw I cut out the the marked pattern for the radio.

Unfortunately, when I was removing the saw from the space I cut my finger on the jigsaw blade when I removed it.

Luckily it was not that major of a cut that I needed outside medical attention. But, still a painful enough reminder to remember to focus when using power tools.  Injury aside the physical install of the radio was completed without further injury: